home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Cream of the Crop 22
/
Cream of the Crop 22.iso
/
database
/
famrt15c.zip
/
README.TXT
< prev
next >
Wrap
Text File
|
1996-10-22
|
9KB
|
196 lines
PROGRAM DESCRIPTION
Family Runner NT is among the finest personal/family schedulers available.
It will prepare calendars and other reports that display one person's upcoming
events or those for several people simultaneously. Data can be filtered when
a report is generated, so that only events for a particular project, or only
those events containing a particular word, will be displayed.
Considering all it can do, the program is surprisingly easy to use.
Its reports, while not as infinitely customizable as those provided by those
output-oriented calendar producers with limited scheduling capability, are
attractive, functional, and simple to set up.
This program will optionally drag events forward from day to day until
you tell the program to tag them for deletion. Finding free time, establish-
ing recurring events, and viewing religious dates (Christian, Jewish, and
Muslim) are a snap for this program. And, as a bonus, the program includes a
Log module that tracks money spent and received. It will even produce an
Income-Expense report for any period of time desired.
Give Family Runner NT a thorough work-out.
NOTE: This software is a living -- and evolving -- product. It
is constantly being enhanced as a result of suggestions from
users. If you have any ideas, don't hesitate to contact
Integra Computing at 770-426-5735.
INSTALLATION INSTRUCTIONS (page 1)
This program will operate only with Windows 95. A version is also
available for Windows 3.x.
If you went through the automated INSTALL.BAT routine, the program files
have already been placed into an INTEGRA directory on your hard disk. If, on
the other hand, you did not go through the INSTALL.BAT routine, you should run
the SETUP.BAT routine. Assuming your printer is attached to the LPT1 port
on your computer, the command to run is
SETUP LPT1
That command will cause the files to be copied to an INTEGRA directory on your
hard disk.
- RUNNING THE PROGRAM -
If you're in a hurry to see what the program is like before completing the
basic setup for Windows, you may do so by using the Windows "Run" routine
or by double-clicking on the file in "My Computer". The file to execute is
the application ULTIMATE.EXE, and it's probably located in the INTEGRA folder
on drive C (if it's not there, use the Windows "Find" routine to locate it).
INSTALLATION INSTRUCTIONS (page 2)
- COMPLETING THE BASIC SETUP FOR WINDOWS 95 -
If you'd like to access the program through its icon, complete the basic
setup for Windows 95:
1) Point to the Start button on the Task Bar. When you RIGHT-click
the mouse, a menu will appear. Select "Open" on the menu.
2) A "Start Menu" box will appear. Double-click on the "Programs"
folder.
3) A "Programs" box will appear, showing the sub-folders currently
included within Programs folder. Double-click on the folder in
which you wish to include this program.
4) A box showing the programs contained within the folder will appear.
Select File | New at the box's pull-down menu. Then, select
"Shortcut" at the sub-menu that appears.
5) A "Create Shortcut" box will appear. Into the "Command Line" item,
type
C:\INTEGRA\ULTIMATE.EXE
6) Then, you'll be asked to select a name or title for this program or
shortcut. Type in anything that is meaningful to you. The new
program will then be added to the folder.
7) For network installation, see the section devoted to Installation in
the program's on-line help.
INSTALLATION INSTRUCTIONS (page 3)
- PRINTING THE MANUAL
The manual consists entirely of on-line help that is organized into
several "chapters" referenced in its table of contents. Selecting "Help" at
the pull-down menu will take you into the help system, where you may search
for information by keyword. Pressing the F1 key almost anywhere within the
program will take you directly to a section of the manual that discusses that
section of the program.
Printing the manual involves several steps. First, get into the help
system ("Help" or F1). When there, select the "Contents" button. At the
Contents page, select File | Print. After the Contents page has printed,
select the first topic in the Contents listing. When that topic appears,
select File | Print. After that topic prints, return to the Contents page
and select the next topic and print it. Repeat this process until the entire
manual has been printed.
INSTALLATION INSTRUCTIONS (page 4)
- PROBLEMS -
VIDEO:
-> If vertical and horizontal scroll bars appear when the program loads,
your window borders may be too wide to allow enough space for this program's
screens to display in full. Reduce the size of your window borders to 1 by
running the "Desktop" program (usually found in "Control Panel" group in
Windows' Program Manager). Or, simply "maximize" the program on the screen.
-> If gibberish appears anywhere in the program, the problem is that the
video driver you are using cannot produce all the fonts used by the program.
Try another driver. Video drivers are selected in the Windows "Setup" program
(usually found in the "Main" group in the Program Manager).
-> If text on the screen or printer seems improperly sized or does not
seem to fit neatly into the areas where it should, there are two possible
reasons:
One possibilty is that the video driver you're using may not be
optimal. Some drivers seem to be incapable of producing text of a selected
font at the correct size, especially at the higher resolutions. If you have
a choice between a driver that uses "large fonts" and one that uses "small
fonts", choose the latter. Video drivers are selected in the Windows "Setup"
program (usually found in the "Main" group in the Program Manager).
Another possible cause of poorly fitting text is that you may be
either missing some font files, or using font files that have been altered
by other software. This program relies upon the following ORIGINAL fonts
supplied by Microsoft Windows: Arial, Courier New, Terminal, MS Serif,
MS Sans Serif, and System. If they seem to be unavailable, they may be
somewhere on your hard disk, but not installed. Try using the Windows
"Fonts" routine (found in the "Control Panel") to find and install (or add)
them. Also useful may be the /NT option discussed near the end of the
on-line help's "Configuration" section.
PRINTER:
-> If fonts appear to be improperly sized, or if gibberish appears on the
printout, make sure that the printer driver that you have installed into
Windows is specifically matched to your EXACT printer model and that the driver
was provided by the printer manufacturer, not Microsoft. A "close" match
or "emulation" may not be good enough, and Microsoft's drivers are generally
less reliable than those from printer manufacturers. If you must use Microsoft
drivers, consider using one for a related printer. If that doesn't work,
try one for an earlier model in the same manufacturer's line (for instance,
if you have an HP LaseJjet 4, you might get the results you desire by using
a LaserJet II or LaserJet III driver). This program does nothing fancy with
your printer. It relies ENTIRELY upon Windows to pass printing instructions
through the driver to the printer. So why do other programs appear to work
with your printer and the driver you are currently using? Perhaps because
those programs don't rely upon the same Arial and Courier New fonts that
this program does. Or perhaps the other programs are somehow bypassing
Windows to print directly to the printer. Be assured that if your Windows
printer driver is a good match for your printer, this program's output will
be fine.
INSTALLATION INSTRUCTIONS (page 6)
- REGISTERED USERS -
If you have registered as a user, you have a serial number printed on the
distribution disk's label. You now need to let the program know that you
acknowledge your serial number. To do so,
1) Go to the program manager and select File | Run at the menu bar.
2) At the Run box, enter
C:\INTEGRA\ULTIMATE.EXE /RP
at the Command Line item. This command assumes that you have loaded the
program onto drive C. If not, substitute the appropriate letter. For
instance, if you loaded the program onto drive F,
F:\INTEGRA\ULTIMATE.EXE /RP
would be entered instead.
3) When asked for your serial number, enter it.
Once you've completed this process, the program will skip the registration
info screen when loading. But you may confirm your serial number and the
number of network workstations for which you are registered by selecting
Help | About at the Main Screen's menu bar when running the program.